Upgrading Firmware Using Kramer Network - Kramer VS-3232DN-EM User Manual

•
VS-3232DN-EM
VS-163264Keypad_[APP_X_xx.xx_xxxx]_201
•
Supported Input / Output Cards – The suffix of card firmware files must be modified
before use. Input and output card firmware files all end with _N, for example:
DTAxr_[OUT4_46_xx.xx_xxxx]_N
This suffix must be changed according to the slot number in which the card is installed
(1-16). For example if the card is installed in slot 7, the firmware file's suffix must be
changed to _7:
DTAxr_[OUT4_46_xx.xx_xxxx]_7
Go to www.kramerav.com/downloads/VS-3232DN-EM
application programs, and to check if firmware upgrades are available (where appropriate).
If necessary, you can downgrade the input/output card firmware by incrementing the previous
firmware file's number to higher than the currently installed firmware. For example if you
upgraded the card's firmware using the DTAxr_[OUT4_46_01.00_0006]_8 file, to
downgrade to the previously installed firmware, rename the previously installed firmware file
to DTAxr_[OUT4_46_01.00_0007]_8.

Upgrading Firmware Using Kramer Network

The VS-3232DN-EM
Kramer Network enterprise management platform, available at
www.kramerav.com/product/VS-3232DN-EM. For instructions on upgrading the firmware
using Kramer Network, see the Kramer Network User Manual.
For information on connecting to the
VS-3232DN-EM via Ethernet
VS-3232DN-EM – Upgrading the VS-3232DN-EM Firmware
Keypad – Keypad firmware files end with _201, for example:
enables upgrading device and card firmware via Ethernet using the
VS-3232DN-EM
on page 16.
to check for up-to-date user manuals,
via Ethernet, see Connecting to the
Kramer Electronics Ltd.
75