Kramer VS-3232DN-EM User Manual page 12

# Feature
24 AC Mains Power Module
25 RESET Button
26 USB Virtual COM Port
USB Mini-B Connector
27 IN 1~16
Connectors
INPUTS
28 IN 17~32
Connectors
29 TEST Module
30 RESOLUTION DIP-switches
31 RS-232 9-pin D-sub Port
32 NET Ethernet RJ-45
Connector
33 OUT 1~16
Connectors
OUTPUTS
34 OUT 17~32
Connectors
35 PATTERN Button
VS-3232DN-EM – Introduction
Figure 3: VS-3232DN-EM Rear Panel Showing DVI cards
Function
Fuse holder and power cord socket. Connect to the AC mains
supply.
Press to restart the VS-3232DN-EM.
Connect to a PC or remote controller (see
VS-3232DN-EM via USB (VCOM)
upgrade of the device and compatible input/output cards (see
Upgrading the VS-3232DN-EM Firmware
Connect to the relevant video sources, depending on the cards
installed (1 to 16, see
Connect to the relevant video sources, depending on the cards
installed (17 to 32, see
Signal generator module for testing video outputs (see
Test Video Card
Set the resolution for video generated by the Test module (see
Setting the Resolution of the Generated Video
Connect to a PC or remote controller (see
VS-3232DN-EM via RS-232
upgrade of the device and compatible input/output cards (see
Upgrading the VS-3232DN-EM Firmware
Connect to a PC or controller via the Ethernet LAN (see
to the VS-3232DN-EM via Ethernet
LINK LED flashes when communication is active. POWER LED lights
when the interface receives power.
Connect to the relevant video acceptors, depending on the cards
installed (1 to 16, see
Connect to the relevant video acceptors, depending on the cards
installed (17 to 32, see
Press the button repeatedly to change the video pattern generated
by the Test module (see
Video on page 37).
on page 15) and perform firmware
Connecting the VS-3232DN-EM
Connecting the VS-3232DN-EM
on page 36).
on page 15) and perform firmware
on page 16).
Connecting the VS-3232DN-EM
Connecting the VS-3232DN-EM
Setting the Pattern of the Generated
Kramer Electronics Ltd.
Connecting to the
on page 74).
on page 12).
on page 12).
Using the
on page 36).
Connecting to the
on page 74).
Connecting
on page 12).
on page 12).
9