Upgrading The Vs-3232Dn-Em Firmware; Upgrading Firmware Using K-Upload - Kramer VS-3232DN-EM User Manual

Upgrading the VS-3232DN-EM
Firmware
The VS-3232DN-EM
input/output cards:
•
UHD-IN4/OUT4-F32
•
UHDA-IN4/OUT4-F32
•
DT-IN4/OUT4-F32
•
DTAxr-IN4/OUT4-F32
•
SDIA-IN4-F32
•
VGAA-IN4/OUT4-F32
Upgrading the firmware of the remaining input / output cards can only be done by authorized
service personnel.
The device and card firmware can be upgraded using:
•
K-Upload via RS-232, USB (VCOM), or Ethernet (see
Upload on page 74).
•
Kramer Network via Ethernet (see
Network on page 75).

Upgrading Firmware Using K-Upload

The VS-3232DN-EM
or Ethernet using the K-Upload software application, available at
www.kramerav.com/product/VS-3232DN-EM. For instructions on upgrading the firmware
using K-Upload, see the K-Upload User Manual.
For information on connecting to the
see Connecting to the VS-3232DN-EM via RS-232
VS-3232DN-EM via USB (VCOM)
Ethernet on page 16, respectively.
Firmware may be available for any of the following components:
The firmware files for each component have different suffixes to help with identification.
•
VS-3232DN-EM
example:
linux163264_[APP_X_xx.xx_xxxx]_0
•
VS-3232DN-EM
16test card_[OUT2_47_xx.xx_xxxx]_200
VS-3232DN-EM – Upgrading the VS-3232DN-EM Firmware
enables upgrading both the device's firmware and that of the following
Upgrading Firmware Using Kramer
enables upgrading device and card firmware via RS-232, USB (VCOM)
VS-3232DN-EM
on page
Control Module – Control module firmware files end with _0, for
Test Module – Test module firmware files end with _200, for example:
Upgrading Firmware Using K-
via RS-232, USB (VCOM), or Ethernet,
on page 15, Connecting to the
15, or Connecting to the VS-3232DN-EM via
Kramer Electronics Ltd.
74