Overview; Sap Ingress Policy - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Overview
There is one default service ingress policy. Each policy can have up to 18 ingress meters. The
default policies can be copied and modified but they cannot be deleted. The default policies are
identified as policy ID 1.
The default policies are applied to the appropriate interface, by default. For example, the default
SAP ingress policy is applied to access ingress SAPs. You must explicitly associate other QoS
policies.
For information about the tasks and commands necessary to access the command line interface
and to configure and maintain your 7210 SAS devices, refer to the CLI Usage chapter in the7210
SR OS Basic System Configuration Guide.

SAP Ingress Policy

A:ALA-7>config>qos>sap-ingress$ info detail
----------------------------------------------
no description
scope template
meter 1 create
exit
meter 11 multipoint create
exit
default-fc be
----------------------------------------------
A:ALA-7>config>qos>sap-ingress$
Page 112
mode trtcm
adaptation-rule cir closest pir closest
rate cir 0 pir max
mbs default
cbs default
mode trtcm
adaptation-rule cir closest pir closest
rate cir 0 pir max
mbs default
cbs default
7210 SAS-E OS Quality of Service Guide