Planmeca Compact I Technical Manual page 77

SERVICE MODE DETAILED DESCRIPTION
n 320 Headrest right joystick horizontal ADC-value
n 321 Headrest right joystick vertical ADC-value
n 322 Headrest left (cabinet side) joystick horizontal ADC-value
n 323 Headrest left (cabinet side) joystick vertical ADC-value
n.999 Main program loop speed.
Technical Manual
In this service mode the headrest right joystick horizontal ADC-value is shown. Value is typi-
cally ±10 when joystick is centered and from ±40 to ±100 when in use. Positive direction is
away from the backrest.
In this service mode the headrest right joystick vertical ADC-value is shown. Value is typically
±10 when joystick is centered and from ±40 to ±100 when in use. Positive direction is up.
In this service mode the headrest left (cabinet side) joystick horizontal ADC-value is shown.
Value is typically ±10 when joystick is centered and from ±40 to ±100 when in use. Positive
direction is away from the backrest.
In this service mode the headrest left (cabinet side) joystick vertical ADC-value is shown.
Value is typically ±10 when joystick is centered and from ±40 to ±100 when in use. Positive
direction is up.
Reserved for factory use.
In Set-mode displays speed with filtering.
Chapter C - SERVICE MODE
Planmeca Compact i C-49