Planmeca Compact I Technical Manual page 87

ERROR MESSAGES
Error
OPERATING LIGHT RELATED
E56 OP-light is erroneously connected (bulb and push-button cross-connected).
E57
reserved
E58
Operating light bulb burned out
SEPARATOR SYSTEM RELATED ERROR MESSAGES
E59.n
The separator (only Dürr or Metasys) is reporting an functional error.
E60
The separator (only Dürr or Metasys) is not responding or the cable is faulty.
E61
The separator is flooded (only Microvac) with too much water.
E62 The newly attached separator is of unknown type. Please update the MCB
software.
E63 WMS error
PATIENT CHAIR RELATED ERROR MESSAGES
E64 Seat position potentiometer or its cable is faulty or disconnected.
E65
Lift motor does not run or no signal from position sensing potentiometer.
E66
Lift motor or its position pot cable has a wrong connection.
E67
Backrest position potentiometer or its cable is faulty or disconnected.
E68
Backrest motor does not run or no signal from position sensing potentiometer.
E69 Backrest motor or its position pot cable has a wrong connection.
E70 reserved
E71 reserved
MCB CPU RELATED ERROR MESSAGES
E72.n Software chip (EPROM or Flash-EPROM) error.
E73.n CPU internal EEPROM error.
E74.n RAM error.
E75.n Program structure error.
E76
reserved
E77
Error in communicating with external serial device.
HEADREST RELATED ERROR MESSAGES
E80.n Headrest error.
E81.n
Headrest communication error.
Technical Manual
Chapter D - HELP & ERROR MESSAGES
Explanation Details on:
page D-19
page D-19
page D-19
page D-19
page D-19
page D-19
page D-19
page D-20
page D-20
page D-20
page D-20
page D-20
page D-21
page D-21
page D-21
page D-21
page D-21
page D-21
page D-22
page D-22
Planmeca Compact i D-9