Chair; Suction System - Planmeca Compact I Technical Manual

Chapter E - PREVENTIVE MAINTENANCE

7 CHAIR

Backrest motor
•
•
Emergency switches
•
Upholsteries
•
•

8 SUCTION SYSTEM

Suction tubes
•
•
Coarse filter
•
Amalgam collector
•
Microvac II suction system
•
•
•
•
Other suction systems
•
E-4 Planmeca Compact i
Operation check.
Clean and grease the worm screw.
Operation check.
Condition check.
Upholsteries are firmly in place. The screws of the seat upholstery are tightened.
Open and clean the suction nozzles.
Tube condition check.
Condition check. Replace if needed.
Condition check. Replace if needed.
Change the middle bottom membrane.
Change the bottom drain membrane.
Change the pressure balancing membrane.
Check the rubber sealing.
Refer to the manufacturer's instructions.
CHAIR
Technical Manual