Planmeca Compact I Technical Manual page 154

Chapter G - PARTS REPLACEMENT & REPAIR
Backrest upholstery
a) Detach the lower corners of the backrest upholstery and remove the upholstery by pulling it.
b) Attach the new backrest upholstery by bending it carefully from its sides and aligning it
properly during the attaching. Press first the center of the upholstery into position and then the
edges to attach all the tapes to their counterparts.
G-4 Planmeca Compact i
Backrest upholstery:
Detach tapes and pull.
UPHOLSTERIES REPLACEMENT
Technical Manual