Table of Contents
Advertisement
6.3 FT41 Specification
6.3.1 List of Servo Parameters
Parameter
No.
Pn512
Pn514
6-94
Name
Output Signal Inverse
2
Settings
Output Signal Inversion for CN1-1 and CN1-2 Terminals
n.
X
0
The signal is not inverted.
1
The signal is inverted.
Output Signal Inversion for CN1-23 and CN1-24 Terminals
n.
X
0
The signal is not inverted.
1
The signal is inverted.
Output Signal Inversion for CN1-25 and CN1-26 Terminals
n.
X
0
The signal is not inverted.
1
The signal is inverted.
n.X
Reserved parameter (Do not change.)
Output Signal Selec-
2
tions 4
n.
X
Reserved parameter (Do not change.)
n.
X
Reserved parameter (Do not change.)
/PM (Preventative Maintenance Output) Signal Allocation
0
Disabled (the above signal output is not used).
1
Output the signal from the CN1-1 or CN1-2 output terminal.
n.
X
2
Output the signal from the CN1-23 or CN1-24 output terminal.
3
Output the signal from the CN1-25 or CN1-26 output terminal.
4 to 6
Reserved setting (Do not use.)
n.X
Reserved parameter (Do not change.)
Setting
Setting
Default
Range
Unit
Setting
0000h to
–
0000h
1111h
0000h to
–
0000h
0666h
Continued from previous page.
Applicable
When
Classi-
Motors
Enabled
fication
After
All
Setup
restart
After
All
Setup
restart
Continued on next page.
Refer-
ence
*1
*1
Advertisement
Table of Contents
Troubleshooting
