Interlogix NS3552-8P-2S-V2 User Manual page 88

Chapter 4: Web configuration
Object
System Location
Buttons
• Click to save changes.
Save
• Click to undo any changes made locally and revert to previously saved
Reset
values.
SNMPv3 configuration
SNMPv3 communities
Configure SNMPv3 communities in the SNMPv3 Community Configuration page. The
entry index key is Community.
The page includes the following fields:
Object
Delete
Community Name
Source IP
Source Mask
Buttons
• Click
Add New Entry
• Click to save changes.
Save
• Click to undo any changes made locally and revert to previously saved
Reset
values.
86
Description
character must not be a minus sign. The allowed string length is 0 to
255.
The physical location of this node (e.g., telephone closet, 3rd floor).
The allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 32 to 126.
Description
Select the check box to delete the entry. It will be deleted during the
next save.
Indicates the security name to map the community to the SNMP
Groups configuration. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
Indicates the SNMP access source address. A particular range of
source addresses can be used to restrict the source subnet when
combined with the source mask.
Indicates the SNMP access source address mask.
to add a new community entry.
NS3552-8P-2S-V2 User Manual