Interlogix NS3552-8P-2S-V2 User Manual page 465

Loop Protect Mode
Description:
Set or show the Loop Protection mode.
Syntax:
Loop Protect Mode [enable|disable]
Parameters:
enable : Enable Loop Protection
disable: Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit [<transmit-time>]
Parameters:
Transmit time interval (1-10 seconds)
Default Setting:
5
Loop Protect Shutdown
Description:
Set or show the Loop Protection shutdown time.
Syntax:
Loop Protect Shutdown [<shutdown-time>]
Parameters:
Shutdown time interval (0-604800 seconds)
A value of zero disables re-enabling the port
Default Setting:
10
Loop Protect Port Configuration
Description:
Show Loop Protection port configuration.
Syntax:
Loop Protect Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Loop Protect Port Mode
Description:
Set or show the Loop Protection port mode.
Syntax:
Loop Protect Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
NS3552-8P-2S-V2 User Manual
Chapter 6: Command line mode
463