Thermal Command - Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
LLDP MED Info
Description:
Show LLDP-MED neighbor device information.
Syntax:
LLDPMED Info [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports

Thermal Command

Thermal Prio_temp
Description:
Set or show the temperature at which the ports shall be shut down.
Syntax:
Thermal prio_temp [<prio_list>] [<shut_down_temp>]
Parameters:
<prio_list>
<shut_down_temp>: Temperature at which ports shall be shut down (0-255°C)
Thermal Port_prio
Description:
Set or show the ports priority.
Syntax:
Thermal port_prio [<port_list>] [<prio>]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Priority (0-3)
<prio>
Thermal Status
Description:
Shows the chip temperature.
Syntax:
Thermal status
Thermal Configuration
Description:
Show thermal_protect configuration.
418
: List of priorities (0-3)
NS3552-8P-2S-V2 User Manual