Interlogix NS3552-8P-2S-V2 User Manual page 61

• Click to update the system log entries, ending at the last entry currently
<<
displayed.
• Click to update the system log entries, starting from the last entry currently
>>
displayed.
• Click to update the system log entries, ending at the last available entry ID.
>>I
• Click to print the system log entry to the current entry ID.
Print
Remote syslog
The System Log Configuration page displays the industrial managed switch remote
system log information details.
The page includes the following fields:
Object
Mode
Syslog Server IP
Syslog Level
Buttons
• Click to apply changes.
Save
• Click to undo any changes made locally and revert to previously saved
Reset
values.
NS3552-8P-2S-V2 User Manual
Description
Indicates the server mode operation. When the mode operation is
enabled, the syslog message is sent to the syslog server. The syslog
protocol is based on UDP communication and received on UDP port
514. The syslog server will not send acknowledgments back to
sender since UDP is a connectionless protocol and it does not
provide acknowledgments. The syslog packet is always sent out even
if the syslog server does not exist. Selections include:
Enabled: Enable remote syslog mode operation.
Disabled: Disable remote syslog mode operation.
Indicates the IPv4 host address of syslog server. If the switch
provides the DNS feature, it also can be a host name.
Indicates what kind of message is sent to the syslog server.
Selections include:
Info: Send information, warnings, and errors.
Warning: Send warnings and errors.
Error: Send errors.
Chapter 4: Web configuration
59