Interlogix NS3552-8P-2S-V2 User Manual page 425

<evc_id>: EVC ID (1-128)
EVC Statistics
Description:
Show or clear EVC statistics.
Syntax:
EVC Statistics [<port_list>] [<class_list>] [<command>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<class_list>: QoS class list, 0-7
<command> : Statistics command: clear|green|yellow|red|discard
EVC ECE Add
Description:
Add or modify EVC Control Entry (ECE):
- If <ece_id> is specified and the ECE exists, the ECE will be modified.
- If <ece_id> is omitted or the ECE does not exist, a new ECE will be added.
- If <ece_id_next> is specified, the ECE will be placed before this entry.
- If <ece_id_next> is 'last', the ECE will be placed at the end of the list.
- If <ece_id_next> is omitted and it is a new ECE, the ECE will be placed last.
- If <ece_id_next> is omitted and the ECE exists, the ECE will not be moved.
Syntax:
EVC ECE Add [<ece_id>] [<ece_id_next>] [uni] [<uni_list>] [<dmac_type>]
[<smac>][tag] [<tag_type>] [<vid>] [<pcp>] [<dei>] [all | (ipv4 [<proto>] [<sip>]
[<dscp>] [<fragment>] [<sport>] [<dport>]) | (ipv6 [<proto>] [<sip_v6>] [<dscp>]
[<sport>] [<dport>])] [direction] [<direction>] [evc] [<evc_id>] [pop] [<pop>] [policy]
[<policy>] [class] [<class>] [outer] [<ot_mode>] [<ot_preserve>] [<ot_pcp>]
[<ot_dei>]
Parameters:
: ECE ID (1-128)
<ece_id>
<ece_id_next>: Next ECE ID (1-128) or 'last'
: UNI keyword
uni
<uni_list> : UNI port list (1-10)
<dmac_type> : DMAC type: any|unicast|multicast|broadcast
: SMAC or 'any'
<smac>
: Tag matching keyword
tag
<tag_type> : Tag type: tagged|untagged|any
: VLAN ID value/range (0-4095) or 'any'
<vid>
: PCP value/range (0-7) or 'any'
<pcp>
: DEI value, 0, 1 or 'any'
<dei>
: Keyword for matching any frame type
all
: Keyword for matching IPv4 frames
ipv4
: IP protocol value (0-255) or 'any'
<proto>
: IPv4 source address (a.b.c.d/n) or 'any'
<sip>
: DSCP value/range (0-63) or 'any'
<dscp>
<fragment> : IPv4 fragment: any|fragment|non-fragment
: UDP/TCP source port value/range (0-65535) or 'any'
<sport>
: UDP/TCP destination port value/range (0-65535) or 'any'
<dport>
NS3552-8P-2S-V2 User Manual
Chapter 6: Command line mode
423