Loop Protect Command - Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
<wtr_timeout>: timer timeout values
<group-id> : protection group id 1 - 64
ERPS Delete
Description:
deletion of a protection group
<group-id> : protection group id for deletion .
Syntax:
Erps delete <group-id>
Parameters:
<group-id>: protection group id 1 - 64
ERPS Topologychange
Description:
specifying topology change propagation parameters for a given protection group
[propagate|nopropagate] : enabling or disabling topology change propagation for a
given group
<group_id>
Syntax:
Erps topologychange [propagate|nopropagate] <group-id>
Parameters:
propagate|nopropagate: topology change propagation configuration
<group-id>
ERPS Configurationt
Description:
deletion of a protection group
<group-id> : protection group id
[statistics] : for displaying R-APS statistics
[clear] : for clearing R-APS statistics.
Syntax:
Erps configuration [<group-id>] [statistics|clear]
Parameters:
<group-id>
statistics|clear: ERPS statistics

Loop Protect Command

Loop Protect Configuration
Description:
Show Loop Protection configuration.
Syntax:
Loop Protect Configuration
462
: protection group id
: protection group id 1 - 64
: protection group id 1 - 64
NS3552-8P-2S-V2 User Manual