Firmware Command; Upnp Command - Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode

Firmware Command

Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load <ip_addr_string> <file_name>
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
<file_name>
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load <ipv6_server> <file_name>
Parameters:
<ipv6_server>: TFTP server IPv6 address
<file_name> : Firmware file name
Firmware Information
Description:
Display information about active and alternate firmware images.
Syntax:
Firmware Information
Firmware Swap
Description:
Activate the alternate firmware image..
Syntax:
Firmware Swap

UPnP Command

UPnP Configuration
Description:
Show UPnP configuration.
Syntax:
UPnP Configuration
Example:
Show UPnP configuration.
NS3552-8P-2S-V2:/>
upnp configuration
448
: Firmware file name
NS3552-8P-2S-V2 User Manual