Interlogix NS3552-8P-2S-V2 User Manual page 62

Chapter 4: Web configuration
SMTP configuration
The SMTP Configuration page displays the industrial managed switch SMTP
configuration details.
The page includes the following fields:
Object
SMTP Mode
SMTP Server
SMTP Port
SMTP Authentication
Authentication User Name
Authentication Password
E-mail From
E-mail Subject
E-mail 1 To / E-mail 2 To
Buttons
• Click to send a test mail to the mail server to indicate if the account is available.
test
• Click to save changes.
Save
• Click to undo any changes made locally and revert to previously saved
Reset
values.
60
Description
Controls whether or not SMTP is enabled on the switch.
Type the SMTP server name or the IP address of the SMTP server.
Set the port number of SMTP service.
SMTP authentication is enabled if selected. Authentication is required
when an email is sent.
Type the user name for the SMTP server if Authentication is Enable.
Type the password for the SMTP server if Authentication is Enable.
Type the sender's email address. This address is used for reply
emails.
Type the subject/title of the email.
Type the receiver's email address.
NS3552-8P-2S-V2 User Manual