Interlogix NS3552-8P-2S-V2 User Manual page 394

Chapter 6: Command line mode
Parameters:
enable : Enable ARP Inspection
disable: Disable ARP Inspection
Default Setting:
disable
Example:
Enable ARP inspection mode
NS3552-8P-2S-V2:/> security network arp inspection mode enable
Security Network ARP Inspection Port Mode
Description:
Set or show the ARP Inspection port mode.
Syntax:
Security Network ARP Inspection Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable ARP Inspection port
disable : Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Example:
Enable the ARP inspection mode of port 1
NS3552-8P-2S-V2:/>
security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [<port_list>] add|delete <vid>
<allowed_mac> <allowed_ip>
Parameters:
<port_list> : Port list or 'all', default: All ports
: Add new port ARP inspection static entry
add
delete : Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
<vid>
<allowed_mac>: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for
doing ARP request
<allowed_ip> : IP address (a.b.c.d), IP address allowed for doing ARP request
Example:
Add ARP inspection static entry.
NS3552-8P-2S-V2:/>
security network arp inspection entry 1 add 1 00-30-
4f-00-00-11 192.168.0.11
Security Network ARP Inspection Status
Description:
392 NS3552-8P-2S-V2 User Manual