Interlogix NS3552-8P-2S-V2 User Manual page 439

<port_list> : Port list or 'all', default: All ports
<queue_list>: Queue list or 'all', default: All queues (0-7)
: Enable port queue policer
enable
: Disable port queue policer
disable
(default: Show port queue policer mode)
Default Setting:
Disable
QoS Port QueuePolicer Rate
Description:
Set or show the port queue policer rate.
Syntax:
QoS Port QueuePolicer Rate [<port_list>] [<queue_list>] [<bit_rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list>: Queue list or 'all', default: All queues (0-7)
<bit_rate> : Rate in kilo bits per second (100-3300000)
Default Setting:
500
QoS Port Scheduler Mode
Description:
Set or show the port scheduler mode.
Syntax:
QoS Port Scheduler Mode [<port_list>] [strict|weighted]
Parameters:
<port_list>: Port list or 'all', default: All ports
strict : Strict mode
weighted: Weighted mode
(default: Show port scheduler mode)
Default Setting:
strict
Example:
Set the port schedule mode in weighted mode
NS3552-8P-2S-V2:/> qos Port Scheduler Mode 1-10 weighted
QoS Port Scheduler Weight
Description:
Set or show the port scheduler weight.
Syntax:
QoS Port Scheduler Weight [<port_list>] [<queue_list>] [<weight>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list>: Weighted queue list or 'all', default: All weighted queues (0-5)
: Scheduler weight (1-100)
<weight>
NS3552-8P-2S-V2 User Manual
Chapter 6: Command line mode
437