Interlogix NS3552-8P-2S-V2 User Manual page 243

Please note that if you want to change the 802.1x authentication type of a wireless
client, (i.e., switch to EAP-TLS from EAP-MD5), you must remove the current existing
wireless network from your preferred connection first, and add it in again.
Configuration sample: EAP-MD5 authentication
1. Go to >
Start Control
2. Right-click on the
3. Click
Properties
4. Click the
Authentication
5. Select
Enable network access control using IEEE 802.1X
authentication.
6. Select
MD-5 Challenge
NS3552-8P-2S-V2 User Manual
Panel, and then double-click on
Local Network Connection.
to open up the Properties setting window.
tab.
from the drop-down list box for EAP type.
Chapter 4: Web configuration
Network Connections.
to enable 802.1x
241