Object
Action Parameters
Buttons
•
Click
to save changes.
Save
•
Click
to undo any changes made locally and revert to previously saved
Reset
values.
•
Click
to return to the previous page without saving the configuration change.
Cancel
QCL status
The QoS Control List Status page shows the QCL status by different QCL users. Each
row describes the QCE that is defined. A conflict occurs if a specific QCE is not applied
to the hardware due to hardware limitations. The maximum number of QCEs is 256 on
each switch.
The page includes the following fields:
Object
User
QCE#
Port
Frame Type
NS3552-8P-2S-V2 User Manual
Description
– Destination TCP/UDP port:(0-65535) or Any, specific or port range
Dport
applicable for IP protocol UDP/TCP.
– QoS class: (0-7) or Default.
Class
– Drop Precedence Level selections include (0-3) or Default.
DPL
– DSCP selections include (0-63, BE, CS1-CS7,
DSCP
or Default.
indicates that the default classified value is not modified
Default
by this QCE.
Description
Indicates the QCL user.
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Indicates the type of frame to look for incoming frames. Possible frame types
are:
Any: The QCE will match all frame types.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
LLC: Only (LLC) frames are allowed.
SNAP: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
Chapter 4: Web configuration
or AF11-AF43)
EF
189
Need help?
Do you have a question about the NS3552-8P-2S-V2 and is the answer not in the manual?