Interlogix NS3552-8P-2S-V2 User Manual page 49

button and log in to the web interface with the new user name and password. The
following appears:
This page includes the following fields:
Object Description
The name identifying the user. This is also a link to
User Name
The privilege level of the user.
Privilege Level
The allowed range is
groups (i.e., it is granted full control of the device). Other values need to refer to
each group privilege level. User privileges should be the same or greater than the
group privilege level to have access to that group.
By default, most groups' privilege level 5 has read-only access and privilege level
10 has read-write access. System maintenance (software upload, factory
defaults, etc.) requires user privilege level 15.
Generally, privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account, and privilege level 5 for a guest account.
Buttons:
• Click
Add New User
Add/edit user
Add, edit, or delete a user in this page.
NS3552-8P-2S-V2 User Manual
to 15. If the privilege level value is 15, it can access all
1
to add a new user
Chapter 4: Web configuration
Add/Edit User.
47