Interlogix NS3552-8P-2S-V2 User Manual page 413

LLDP Mode [<port_list>] [enable|disable|rx|tx]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable LLDP reception and transmission
disable: Disable LLDP
: Enable LLDP reception only
rx
: Enable LLDP transmission only
tx
(default: Show LLDP mode)
Default Setting:
disable
Example:
Enable port1 LLDP function.
NS3552-8P-2S-V2:/>
lldp mode 1 enable
LLDP Optional TLV
Description:
Show or Set LLDP Optional TLVs.
Syntax:
LLDP Optional_TLV [<port_list>]
[port_descr|sys_name|sys_descr|sys_capa|mgmt_addr] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
port_descr
sysm_name
sys_descr
sys_capa
mgmt_addr
(default: Show optional TLV's configuration)
: Enables TLV
enable
: Disable TLV
disable
(default: Show optional TLV's configuration)
Default Setting:
Description of the port: Enable
System name:
Description of the system: Enable
System capabilities:
Master's IP address:
Example:
Disable description of the port for port1
NS3552-8P-2S-V2:/>
lldp optional_tlv 1 port_descr disable
LLDP Interval
Description:
Set or show LLDP Tx interval.
Syntax:
LLDP Interval [<interval>]
Parameters:
NS3552-8P-2S-V2 User Manual
: Description of the port
: System name
: Description of the system
: System capabilities
: Master's IP address
Enable
Enable
Enable
Chapter 6: Command line mode
411