Interlogix NS3552-8P-2S-V2 User Manual page 419

<policy_list>: List of policies to delete
LLDP MED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [latitude|longitude|altitude]
[north|south|west|east|meters|floor] [coordinate_value]
Parameters:
Latitude, 0 to 90 degress with max. 4 digits (Positive numbers are
:
latitude
north of the equator and negative numbers are south of the equator).
: Longitude,0 to 180 degress with max. 4 digits (Positive values are
longitude
East of the prime meridian and negative numbers are West of the
prime meridian.
: Altitude, Meters or floors with max. 4 digits.
altitude
(default: Show coordinate location configuration)
north|south|west|east|meters|floor:
: North (Valid for latitude)
North
: South (Valid for latitude)
South
: West (Valid for longitude)
West
: East (Valid for longitude)
East
: Meters (Valid for altitude)
Meters
: Floor (Valid for altitude)
Floor
lldpmed Coordinate value
coordinate_value
LLDP MED Datum
Description:
Set or show LLDP-MED Coordinates map datum.
Syntax:
LLDPMED Datum [wgs84|nad83_navd88|nad83_mllw]
Parameters:
wgs84|nad83_navd88|nad83_mllw:
: WGS84
wgs84
nad83_navd88 : NAD83_NAVD88
nad83_mllw : NAD83_MLLW
lldpmed Coordinate datum
LLDP MED Fast
Description:
Set or show LLDP-MED Fast Start Repeat Count.
Syntax:
LLDPMED Fast [<count>]
Parameters:
The number of times the fast start LLDPDU are being sent during the
<count> :
activation of the fast start mechanism defined by LLDP-MED (1-10).
NS3552-8P-2S-V2 User Manual
: lldpmed Coordinate value
Chapter 6: Command line mode
417