Interlogix NS3552-8P-2S-V2 User Manual page 393

<allowed_ip> <allowed_mac>
Parameters:
<port_list> : Port list or 'all', default: All ports
: Add new port IP source guard static entry
add
delete : Delete existing port IP source guard static entry
: VLAN ID (1-4095)
<vid>
<allowed_ip> : IP address (a.b.c.d), IP address allowed for doing IP source guard
<allowed_mac>: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for
doing IP source guard
Example:
Add IP source guard static entry.
NS3552-8P-2S-V2:/>
security network ip source guard entry 1 add 1
192.168.0.20
Security Network IP Source Guard Status
Description:
Show IP source guard static and dynamic entries.
Syntax:
Security Network IP Source Guard Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show IP source guard static and dynamic entries.
NS3552-8P-2S-V2:/>
security network ip source guard status
Security Network IP Source Guard Translation
Description:
Translate IP source guard dynamic entries into static entries.
Syntax:
Security Network IP Source Guard Translation
Security Network ARP Inspection Configuration
Description:
Show ARP inspection configuration.
Syntax:
Security Network ARP Inspection Configuration
Example:
Show ARP inspection configuration.
NS3552-8P-2S-V2:/>
security network arp inspection configuration
Security Network ARP Inspection Mode
Description:
Set or show ARP inspection mode.
Syntax:
Security Network ARP Inspection Mode [enable|disable]
NS3552-8P-2S-V2 User Manual
Chapter 6: Command line mode
391