Ipmc Command - Interlogix NS3552-8P-2S-V2 User Manual

Chapter 6: Command line mode
enable : Enable Loop Protection
disable: Disable Loop Protection
Loop Protect Port Action
Description:
Set or show the Loop Protection port action.
Syntax:
Loop Protect Port Action [<port_list>] [shutdown|shut_log|log]
Parameters:
<port_list>: Port list or 'all', default: All ports
shutdown : Shutdown the port
shut_log : Shutdown the port and Log event
: (Only) Log the event
log
Loop Protect Port Transmit
Description:
Set or show the Loop Protection port transmit mode.
Syntax:
Loop Protect Port Transmit [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Loop Protection
disable: Disable Loop Protection
Loop Protect Status
Description:
Show the Loop Protection status.
Syntax:
Loop Protect Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports

IPMC Command

IPMC Configuration
Description:
Show IPMC snooping configuration.
Syntax:
IPMC Configuration [mld|igmp]
Parameters:
mld|igmp:
mld : IPMC for IPv6 MLD
igmp: IPMC for IPv4 IGMP
464 NS3552-8P-2S-V2 User Manual