Configuration Command - Interlogix NS3552-8P-2S-V2 User Manual

NS3552-8P-2S-V2:/>
mirror port 2
Mirror Mode
Description:
Set or show the mirror mode.
Syntax:
Mirror Mode [<port_list>] [enable|disable|rx|tx]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Rx and Tx mirroring
disable: Disable Mirroring
: Enable Rx mirroring
rx
: Enable Tx mirroring
tx
(default: Show mirror mode)
Default Setting:
disable
Example:
Enable the mirror mode for port 1-4.
NS3552-8P-2S-V2:/> mirror mode 1-4 enable

Configuration Command

Configuration Save
Description:
Save configuration to TFTP server.
Syntax:
Config Save <ip_server> <file_name>
Parameters:
<ip_server>: TFTP server IP address (a.b.c.d)
<file_name>: Configuration file name
Configuration Load
Description:
Load configuration from TFTP server.
Syntax:
Config Load <ip_server> <file_name> [check]
Parameters:
<ip_server>: TFTP server IP address (a.b.c.d)
<file_name>: Configuration file name
: Check configuration file only, default: Check and apply file
check
NS3552-8P-2S-V2 User Manual
Chapter 6: Command line mode
447