RADIATOR
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system by loosening drain plug (1) of radiator (2).
3) Disconnect coupler of cooling fan motor.
4) Remove front bumper (see Section 9).
5) Remove reservoir.
6) Disconnect radiator inlet (2) and outlet hoses (1) from radiator
(3).
7) Remove cooling fan assembly (4) from radiator.
8) Remove radiator support upper brackets (5) and then remove
radiator.
INSPECTION
Check radiator for leakage or damage. Straighten bent fins, if any.
CLEANING
Clean frontal area of radiator cores.
ENGINE COOLING 6B-11