Suzuki WagonR+ RB310 Service Manual page 2301

5B-10 FRONT BRAKE
INSTALLATION
CAUTION:
Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
1) Install caliper (1) to caliper carrier (2).
2) Torque caliper pin bolts (3) to specifications.
Tightening Torque
.
(a): 30 N m (3.0 kg-m, 22.0 lb-ft)
NOTE:
Make sure that boots are fit into groove securely.
3) Install brake flexible hose (1) and new gaskets (3) as shown and
torque hose bolt (2) to specification.
Tightening Torque
.
(b): 23 N m (2.3 kg-m, 17.0 lb-ft)
4) Torque wheel nuts to specification.
Tightening Torque
.
(c): 85 N m (8.5 kg-m, 61.5 lb-ft)
5) After completing installation, fill reservoir with brake fluid and
bleed brake system. Perform brake test and check each
installed part for oil leakage.
FRONT BRAKE DISC
CAUTION:
During removal, be careful not to damage brake flexible
hose and not to depress brake pedal.
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper assembly by loosening carrier bolts (1).
3) Remove disc by using 8 mm bolts (1) (2 pcs).