3D-12 FRONT SUSPENSION
7) Pull out wheel hub (1) with special tools.
Special Tool
(A): 09943-17912
(B): 09942-15511
8) Remove tie-rod end nut and disconnect tie-rod end (2) from
knuckle (1) with puller.
CAUTION:
Never reuse tie-rod end nut.
Reused nut will not be locked securely.
9) Remove wheel speed sensor (1) from knuckle (if equipped).
10) Remove strut bracket bolts (1) from strut bracket and then ball
stud bolt (2).
11) Remove knuckle (3).
DISASSEMBLY
1) Uncaulk and remove dust cover (1).