Suzuki WagonR+ RB310 Service Manual page 2896

HAZARD SWITCH
REMOVAL
1) Remove center lower garnish. Refer to step 3) of HEATER CON-
TROL LEVER ASSEMBLY REMOVAL in Section 1A.
2) Remove hazard switch (1) from hazard switch case (2) installed
instrument panel with unlocked the locking part (3) as shown in
figure.
INSPECTION
Check the continuity of each switch position.
If any continuity is not obtained, replace switch.
INSTALLATION
Reverse removal procedure for installation.
LIGHTING SYSTEM 8B-15