8) Remove water pump pulley (1) and drive belt.
9) Remove crankshaft pulley by removing pulley bolts (1).
10) Release harness clamps.
11) Remove timing belt outside cover.
12) For installation of timing belt, align 4 timing marks as shown in
1. "V" mark on cylinder
head cover
2. Timing mark by "E"
on camshaft timing
belt pulley
3. Arrow mark on oil
pump case
4. Timing mark on
crankshaft timing belt
pulley
13) Remove timing belt tensioner (3), tensioner plate (2), tensioner
figure by turning crankshaft.
spring (4) and timing belt (1).
ENGINE MECHANICAL 6A1-19