8C-2 INSTRUMENTATION / DRIVER INFORMATION
CAUTIONS IN SERVICING
Refer to Section 8.
SYMBOLS AND MARKS
Refer to Section 8.
WIRING COLOR SYMBOLS
Refer to Section 8.
ABBREVIATIONS
Refer to Section 8.
JOINT CONNECTOR
Refer to Section 8.
FUSE BOX AND RELAY
Refer to Section 8.
POWER SUPPLY DIAGRAM
Refer to Section 8.
COMBINATION METER
If equipped
NOTE:
Terminal arrangement of coupler viewed from harness side.
Coupler
1. To ground
2. To ignition switch
3. To ground
4. To SDM
5. Blank
6. To oil pressure switch
7. To ABS control module
8. To EPS control module
9. Blank
10. To ABS control module
11. To turn and hazard switch
12. Blank
GENERAL DESCRIPTION
B
13. To dimmer switch
B / W
14. Blank
B
15. To speed sensor
Bl
16. Blank
–
17. To positive terminal at battery
Y / B
18. To lighting switch
O
19. To ground
Gr
20. To fuel level gauge
–
21. To ECT sensor
Bl / B
22. Blank
G / Y
23. To generator
–
If equipped
The upper side of combination meter
R
24. To brake fluid level switch and
–
parking brake switch
V
25. To A / T control module
–
26. To ECM
W / Bl
27. To turn and hazard switch
R / Y
28. To ignition switch (ACC)
Br
29. To positive terminal at battery
Y / R
30. To door switch (driver side)
W / G
31. To ECM
–
32. Blank
W / R
BUZZER
Y / G
Bl / Y
V / W
G / R
Y / B
W / Bl
B / O
Br / Y
–