Suzuki WagonR+ RB310 Service Manual page 2869

7C-8 CLUTCH
CLUTCH COVER, CLUTCH DISC AND FLYWHEEL
: Tightening Torque
: Do not reuse
UNIT REPAIR OVERHAUL
REMOVAL
1) Dismount transmission assembly referring to Section 7A.
2) Hold flywheel stationary with special tool (A) and remove clutch
cover bolts (1), clutch cover (2) and clutch disc.
Special Tool
(A): 09924-17810
3) Pull out input shaft bearing (1) by using special tool (B) and
wrench.
Special Tool
(B): 09917-58010
1. Flywheel
2. Clutch release shaft seal:
Apply grease A 99000-25010 to seal lip.
3. Clutch release shaft No.2 bush:
Apply grease A 99000-25010 to bush inside.
4. Return spring
5. Clutch release shaft
6. Clutch release shaft No.1 bush:
Apply grease A 99000-25010 to bush inside.
7. Release bearing:
Apply grease A 99000-25010 to joint of bearing
and release shaft and also bearing inside.
8. Clutch cover
9. Clutch disc
10. Clutch cover bolt