Suzuki WagonR+ RB310 Service Manual page 2931

8D-20 WINDOWS, MIRRORS, SECURITY AND LOCKS
G02-2
G02-8
POWER DOOR LOCK CIRCUIT
INSPECTION
1) Disconnect negative cable at battery.
2) Disconnect door lock controller coupler.
3) Use a 12 V battery to connect its (+) terminal to terminal G02-3,
and its (–) terminal to terminal G02-2. Check all power door locks
are in lock position.
Connect battery (+) terminal to G02-8, and its (–) terminal to
G02-3
G02-2. Check all power door locks (except back door lock) are
in dead lock position.
Connect battery (+) terminal to G02-2, and its (–) terminal to
G02-3 and G02-8. Check all power door locks are in unlock posi-
tion. If check result is not satisfactory, repair wiring harness and
recheck.
4) Connect battery negative cable at battery.
5) Check that the voltage and resistance between following termi-
nals are specifications.