Suzuki WagonR+ RB310 Service Manual page 2837

7B-106 AUTOMATIC TRANSMISSION (4 A / T)
1. Differential side R bearing
2. Speedometer drive gear
3. Differential side pinion shaft pin
4. Differential case
5. Differential side L bearing
4) Press-fit new sensor rotor (1) with groove (2) side downward as
shown by using special tools and copper hammer.
Special Tool
(F): 09951-76010
(G): 09940-54910
5) Support differential assembly as illustrated so as to float L bear-
ing, and then press-fit R bearing by using special tool and copper
hammer.
Special Tool
(D): 09924-74510
(E): 09926-68310
(H): 09951-16060
6) Hold differential assembly with soft jawed vise (3), install final
gear (2) and then tighten it with 8 bolts to specified torque.
CAUTION:
Use of bolts other than specified ones is prohibited.
Tightening Torque
(a): 90 N
1. Final gear bolt
.
m (9.0 kg-m, 65.0 lb-ft)