Rear Door Assembly - Suzuki WagonR+ RB310 Service Manual

9-20 BODY SERVICE
B
"A"
"A" : 8 mm (0.3 in.)
D Adjust door clearance as following procedure.
Using special tool (B), (C) and adjust clearance between rear
door and body at the beginning, refer to "PANEL CLEARANCE"
in this section.
Next, adjust clearance between front door and body, front door
and rear door, refer to "PANEL CLEARANCE" in this section.
Special Tool B: 09960-48320
C
D Adjust door latch striker position by referring to "FRONT DOOR
LOCK INSTALLATION" Section so that door is positioned correctly.
D Adjust front door cushion (2) into dimension (A) so that bring
cushion into contact with body panel when the door is closed.
D After installation, open and close the door to check looseness.
Replace door open stopper pin when there is looseness.
D When weatherstrip is hardened, water leak may develop.
In such case, replace it with new one.
D Apply grease to rotating part of door hinge.
1. Door panel

REAR DOOR ASSEMBLY

REMOVAL/INSTALLATION
Follow procedures for Front Door removal/installation in this sec-
tion.
C: 09960-48310