Suzuki WagonR+ RB310 Service Manual page 2498

11) Install engine right mounting bracket (1), stiffener (2) and en-
gine right mounting swing bracket (3).
Tightening Torque
.
(a): 55 N m (5.5 kg-m, 40.0 lb-ft)
12) Remove support device.
13) Install A/C compressor bracket and A/C compressor, if
equipped.
14) Connect A/C suction and discharge hoses, if equipped.
15) Adjust drive belt tension, referring to "ENGINE COOLING" sec-
tion.
16) Adjust A/C compressor belt tension, if equipped.
Refer to Section 1B.
17) Evacuate and charge air conditioning system, refer to Section
1B.
18) Install suction pipe to air cleaner assembly, refer to INSTALLA-
TION of AIR CLEANER ASSEMBLY in this section.
19) Connect negative cable at battery.
ENGINE MECHANICAL 6A1-23