Suzuki WagonR+ RB310 Service Manual page 3059

10B-42 AIR BAG SYSTEM
1. SDM
2. SDM connector
3. SDM bolts
D SDM
– Check for external damage such as deformation, scratch,
crack, peeled paint, etc.
– Check that SDM cannot be installed properly due to a cause
in itself.
– Check that connector or lead wire of SDM has a scorching,
melting or damage.
– Check that connector is connected securely or locked.
– Check SDM connector and terminals for tightness.
– Check SDM sets a diagnostic trouble code (Refer to "DTC
Check" in this section) and the diagnostic table leads to a mal-
functioning SDM.
If any faulty condition is found in above checks, replace.
D Instrument panel member and reinforcement
– Check for any distortion, bending, cracking or other damage.
If any faulty condition is found in above checks, replace.