6A1-20 ENGINE MECHANICAL
1. Camshaft allowable turning range - - - By timing
mark, within 90_ from "V" mark on head cover on
both right and left.
2. Crankshaft allowable turning range - - - By timing
mark, within 90_ from arrow mark on oil pump
case on both right and left.
CAUTION:
D After timing belt is removed, never turn camshaft and
crankshaft independently more than such an extent as
shown in figure. If turned, interference may occur among
piston and valves, and parts related to piston and valves
may be damaged.
D Never bend timing belt.
INSPECTION
D Inspect timing belt for wear or crack.
Replace it as necessary.
D Inspect tensioner for smooth rotation.
INSTALLATION
1) Install tensioner plate to tensioner.
Insert lug (1) of tensioner plate into hole (2) in tensioner.