Suzuki WagonR+ RB310 Service Manual page 2543

6A1-68 ENGINE MECHANICAL
MAIN BEARINGS, CRANKSHAFT AND CYLINDER BLOCK
: Tightening Torque
: Do not reuse
1. Cylinder block
2. Front oil seal:
Apply engine oil to contact part
of crankshaft with oil seal lip.
3. Main bearing:
Apply engine oil to bearing
inside surfaces.
4. Bearing cap
5. Cap bolt:
Apply engine oil to bolt and
bearing surfaces.
6. Timing pulley key
7. Crankshaft:
Apply engine oil to crankshaft
journals.
8. Thrust bearing:
Set oil grooves of bearing to
crank weds.
Apply engine oil.
9. Rear oil seal:
Apply engine oil to contact part
of crankshaft with oil seal lip.
10. Pin
11. Oil seal housing gasket
12. Oil seal housing
13. Housing bolts
14. Input shaft bearing
15. Flywheel
16. Flywheel bolts
17. Knock sensor