9-22 BODY SERVICE
INSTALLATION
Reverse removal procedure to install back door noting the following
points.
D Secure wiring harness.
D Adjust door latch striker position by referring "BACK DOOR
LOCK ASSEMBLY INSTALLATION" so that door is positioned
correctly.
D Adjust door cushion so that door contacts body when closed.
D Adjust door clearance by loosening door hinge mounting bolts
and nuts referring to "PANEL CLEARANCE" in this section.
D Apply grease to hinge rotating part.
D Tighten door hinge mounting nut to specified torque.
Tightening Torque: 23 N
.
m (2.3 kg-m, 17.0 lb-ft)