Suzuki WagonR+ RB310 Service Manual page 2980

Lower door hinge shown
Upper door hinge shown
INSTALLATION
Reverse removal procedure to install door assembly, noting the fol-
lowing points.
NOTE:
When replacing door, coat replacement door inside with wax
for proper anticorrosion treatment.
Refer to "UNDERCOATING/ANTI-CORROSION COMPOUND
APPLICATION AREA" in "BODY REPAIR MANUAL".
D When door hinge pin (1) is installed to install door to body, turn
hinge pin cut section to vihecle forward.
D Drive in door hinge pin (1) as become follow dimensions "a".
Dimension "a": 10 mm (0.4 in.)
D When door open stopper (1) is installed, be care full to face side
or reverse side or door open stopper.
Front right side door : FR caved seal is face.
Front left side door : FL caved seal is face.
BODY SERVICE 9-19