Suzuki WagonR+ RB310 Service Manual page 2485

6A1-10 ENGINE MECHANICAL
360_
8) After checking and adjusting valve lashes at valves (1), (2), (5)
and (7), (or (3), (4), (6) and (8)) rotate crankshaft exactly one full
turn (360_) and check the same at valves (3), (4), (6) and (8) (or
(1), (2), (5), and (7)). Adjust them as necessary.
9) After checking and adjusting all valves, reverse removal proce-
dure for installation.
AIR CLEANER ELEMENT
This air cleaner element is of dry type. Remember that it needs
cleaning according to following procedure.
REMOVAL
1) Disconnect air cleaner outlet No.1 hose from air cleaner assem-
bly (1).
2) Open air cleaner case after unhooking its clamps.
3) Remove air cleaner element from case.
INSPECTION
Check air cleaner element for dirt. Replace excessively dirty ele-
ment.
CLEANING
Blow off dust by compressed air from air outlet side of element.
INSTALLATION
Reverse removal procedure for installation.