BLOWER FAN & DEFOGGER SWITCH
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove ashtray, instrument center upper garnish (1), heater
control knob (3), instrument center lower garnish (2) and radio
or accessory case (if equipped).
3) Disconnect blower fan switch coupler.
4) Remove blower fan switch (4) with unlocked the locking part (5)
as shown in figure.
INSTALLATION
Reverse removal sequence to install blower fan switch.
INSPECTION OF BLOWER FAN SWITCH
Check blower fan switch for each terminal-to-terminal continuity.
For the detail refer to "WIRING CIRCUIT" earlier in this section.
TERMINAL
POSITION
OFF
1
2
3
4
HEATER AND VENTILATION 1A-9
E
L
M
L
M
H
H