Suzuki WagonR+ RB310 Service Manual page 2794

2. Steering gear box
3. A / T oil pan
FRONT
4. Torque converter housing
5. Transmission case
DIFFERENTIAL SIDE OIL SEAL
REPLACEMENT
1) Lift up vehicle and drain transmission oil.
2) Remove drive shaft joints from differential gear of transmission.
Refer to SECTION 4 (DRIVE SHAFT) for procedure to discon-
nect drive shaft joints.
For differential side oil seal removal, it is not necessary to re-
move drive shafts from steering knuckle.
3) Remove differential side oil seal (1) by using flat end rod or like.
4) Install new differential side oil seal by using special tool.
NOTE:
For oil seal installation, press-fit oil seal so that transmis-
sion case end face is flush with oil seal end face.
Special Tool
(A): 09913-75510
FRONT
5) Install drive shaft referring to SECTION 4.
6) Refill A/T fluid referring to CHANGING FLUID of MAINTE-
NANCE SERVICE.
AUTOMATIC TRANSMISSION (4 A / T) 7B-63