1. Shift switch
SHIFT SWITCH
REMOVAL
1) Block wheels and turn selector lever to "N" range.
2) Disconnect shift switch coupler and selector cable.
3) Remove shift switch from transmission case.
CAUTION:
Do not overhaul shift switch.
INSPECTION
1) Disconnect shift switch coupler (2).
2) Check that continuity exists at terminals shown below by moving
selector lever.
Terminal
B
Switch
Position
P
R
N
D
2
L
INSTALLATION
1) Using flat tip screwdriver, turn shift switch to have the match
marks (1) line up (shift switch "N" range).
2) Turn selector lever (1) to "N" range (to have the automatic trans-
mission to "N" range).
AUTOMATIC TRANSMISSION (4 A / T) 7B-53
A
H
C
E
D
G
I
F