Suzuki WagonR+ RB310 Service Manual page 3017

10A-6 SEAT BELT
REAR SEAT BELT
WARNING:
Be sure to read "Service Precautions" earlier in this section
before starting to work and observe every precaution dur-
ing work.
REMOVAL
1) Remove rear seat (1) referring to "BODY SERVICE" section.
2) Refer to the left figure to remove rear seat belt (2).
INSPECTION
Check rear seat belt for the same items as front seat belt inspection
other than related to pretensioner.
INSTALLATION
Install the rear seat belt observing the following precautions.
D Seat belt anchor bolts should have an unified fine thread (7/16 –
20 UNF). Under no circumstances should any different sized or
metric screw threads be used.
D Be sure to tighten seat belt anchor bolts to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)