Suzuki WagonR+ RB310 Service Manual page 2907

8C-6 INSTRUMENTATION / DRIVER INFORMATION
INSTALLATION
1) Install ignition (main) switch to steering column.
2) Install ignition switch cylinder assembly. Refer to step 5) of
STEERING COLUMN INSTALLATION in Section 3C.
3) Connect ignition (main) switch coupler.
4) Connect negative cable at battery.
5) Enable air bag system. Refer to ENABLING AIR BAG SYSTEM
in Section 10B.
COMBINATION METER
REMOVAL
1) Disconnect negative cable at battery.
2) Disable air bag system. Refer to DISABLING AIR BAG SYSTEM
in Section 10B.
3) Remove instrument cluster panel (1).
4) Remove screws fastening combination meter.
5) Pull combination meter from instrument panel.
6) Turn lever (1) locking combination meter coupler (2) and discon-
nect coupler (2).