Suzuki WagonR+ RB310 Service Manual page 2978

BACK DOOR GLASS
REMOVAL AND INSTALLATION
Refer to "WINDSHIELD" section as removal and installation proce-
dures are basically the same. However, note the following.
NOTE:
Observe the following precautions when applying adhesive (4)
along glass (2) edge.
D Adhesive (4) should be applied evenly especially in height.
D Be careful not to damage primer (3).
D Press glass against body quickly after adhesive (4) is ap-
plied.
Height
Width
Width
Clearance "e" : 13 mm (0.51 in.)
1. Fastener
"b": 15 mm (0.59 in.)
"c" : 7 mm (0.28 in.)
"d": 16 mm (0.63 in.)
BODY SERVICE 9-17